BK2

Print
Desing:
With a single radial clamping screw per hub ISO 4762. Any imbalance of the clamping hubs is compensated for by balancing bores located on the inside of the hub.
Temperatura Range:
-30° C bis +100° C (-22° F to +212° F)
Backlash:
Absolutely backlash-free due to frictional clamp connection.
Service Life:
These couplings are maintenance-free if the technical ratings are not exceeded.
Tolerance:
On the hub/shaft connection 0.01 to 0.05 mm.
Material:
Bellows made of highly flexible high-grade stain-
less steel, hub material: see table below.
Manufacturer: R+W
Description

Desing:

With a single radial clamping screw per hub ISO 4762. Any imbalance of the clamping hubs is compensated for by balancing bores located on the inside of the hub.

Temperatura Range:

-30° C bis +100° C (-22° F to +212° F)

Backlash:

Absolutely backlash-free due to frictional clamp connection.

Service Life:

These couplings are maintenance-free if the technical ratings are not exceeded.

Tolerance:

On the hub/shaft connection 0.01 to 0.05 mm.

Material:

Bellows made of highly flexible high-grade stain-

less steel, hub material: see table below.

Brief overloads:

Acceptable up to 1.5 times the value specified.

Speeds:

Up to 10,000 rpm, in excess of 10,000 available

with a finely balanced version.

Non standard application:

Custom designs with varied tolerances, keyways, non-standard material, bellows and ATEX designs are available upon request.

Reviews

There are yet no reviews for this product.
Downloadhttp://bigtheme.net/joomla Joomla Templates