BK5

Print
One side with a single radial clamping screw ISO 4762.
One side includes backlash-free clamping hub and tapered press-fit
device. Any imbalance of the clamping hub, is compensated
with balancing bores located on the inside of the hub.

-30° C to +100° C (-22° F to +212° F)

Absolutely backlash-free due to frictional clamp
connection and axial pretensioning of the tapered
press-fit segments.
Manufacturer: R+W
Description

One side with a single radial clamping screw ISO 4762.
One side includes backlash-free clamping hub and tapered press-fit
device. Any imbalance of the clamping hub, is compensated 
with balancing bores located on the inside of the hub.

 

-30° C to +100° C (-22° F to +212° F)

 

Absolutely backlash-free due to frictional clamp
connection and axial pretensioning of the tapered
press-fit segments.

 

These couplings have an infinite life and are maintenance- free if the technical ratings are not exceeded.

 

On the hub/shaft connection 0.01 to 0.05 mm.

 

Bellows made of highly flexible, high-grade stain-
less steel; clamping hubs up to series 80 aluminium,
and 150 and up steel. Tapered segment on hub face:
glass-fiber reinforced plastic molded onto an
aluminium hub.

 

Up to 10,000 rpm, over 10,000 rpm available with a 
finely balanced version.

 

Acceptable up to 1.5 times the value specified.

 

  • absolutely backlash-free and torsionally rigid
  • easy mounting and dismounting
  • wear-free and maintenance-free
  • electrically and thermally insulated
  • low moment of inertia

compensation for misalignment

Reviews

There are yet no reviews for this product.
Downloadhttp://bigtheme.net/joomla Joomla Templates