BKH

Print
Both clamping hubs are completely separable, due to split hubs
and two radial screws ISO 4762 on each hub.
Any imbalance of the clamping hubs is compensated for
by balancing bores located on the inside of the hub..

-30° C to +100° C (-22° F to +212° F)

Absolutely backlash-free due to frictional clamp connection..

These couplings are maintenance-free if the
technical ratings are not exceeded.

On the hub/shaft connection 0.01 to 0.05 mm

Bellows made of highly flexible high-grade
stainless steel. Hub material see table

Acceptable up to 1.5 times the value specified.
Manufacturer: R+W
Description

Both clamping hubs are completely separable, due to split hubs 
and two radial screws ISO 4762 on each hub. 
Any imbalance of the clamping hubs is compensated for 
by balancing bores located on the inside of the hub..

 

-30° C to +100° C (-22° F to +212° F)

 

Absolutely backlash-free due to frictional clamp connection..

 

These couplings are maintenance-free if the
technical ratings are not exceeded.

 

On the hub/shaft connection 0.01 to 0.05 mm

 

Bellows made of highly flexible high-grade
stainless steel. Hub material see table

 

Acceptable up to 1.5 times the value specified.

 

Up to 10,000 rpm, in excess of 10,000 available 
with a finely balanced version.

 

Custom designs with varied tolerances, keyways, non-standard material,
bellows and ATEX designs are available upon request.

 

  • easy to mount
  • suited for space restricted installations
  • low moment of inertia

fine balanced up to 40,000 RPM

Reviews

There are yet no reviews for this product.
Downloadhttp://bigtheme.net/joomla Joomla Templates