BKM

Print
With a single ISO 4762 radial clamping screw per hub. Self opening clamp system optional: Loosening the clamping screw applies force to the pin, which will force the clamp into the open position for easy mounting and dismounting.

-30° C to +100° C (-22° F to +212° F)

Absolutely backlash-free due to frictional clamped connection.

These couplings have an infinite life and are maintenance-free if the technical ratings are not exceeded.
Manufacturer: R+W
Description

With a single ISO 4762 radial clamping screw per hub. Self opening clamp system optional: Loosening the clamping screw applies force to the pin, which will force the clamp into the open position for easy mounting and dismounting.

 

-30° C to +100° C (-22° F to +212° F)

 

Absolutely backlash-free due to frictional clamped connection.

 

These couplings have an infinite life and are maintenance-free if the technical ratings are not exceeded.

 

On the hub/shaft connection 0.01 to 0.05 mm.

 

Bellows made of highly flexible high-grade stainless steel. Hub material see table.

 

Standard up to 10,000
Option 1: In excess of 10,000 rpm with a finely balanced version
Option 2: in excess of 30,000 rpm, with balancing grade G = 2.5 (see table)

 

Custom designs with varied tolerances, keyways, non-standard material, bellows and ATEX designs are available upon request.

 

  • compact design for high torques
  • easy to mount
  • suited for space restricted installations

low moment of inertia

Reviews

There are yet no reviews for this product.
Downloadhttp://bigtheme.net/joomla Joomla Templates