FK1

Print
Radial clamping is achieved by using a ISO 4766 M2 x 2 set screw.

-35° C to +90° C (-31° F to +194° F)

These couplings are maintenance-free if the technical limits are not exceeded.

Acceptable up to 1.5 times the value specified.

Coupling material: Polyamid
Hub material: stainless steel
Bore diameter: 1.5 mm
fk1
fk1-2d
Manufacturer: R+W
Description

Radial clamping is achieved by using a ISO 4766 M2 x 2 set screw. 

 

-35° C to +90° C (-31° F to +194° F) 

 

These couplings are maintenance-free if the technical limits are not exceeded.

 

Acceptable up to 1.5 times the value specified.

 

Coupling material: Polyamid 
Hub material: stainless steel 
Bore diameter: 1.5 mm

 

Radial clamping is achieved by using a ISO 4766 M2 x 2 set screw.

 

Up to 10.000 U/min

 

The extended diameter can be reduced by using a flattened shaft.

 

A further reduction of the ø to 4.5 mm can be reached by using a M2x1.5 set screw (Additional Charge).

Reviews

There are yet no reviews for this product.
Downloadhttp://bigtheme.net/joomla Joomla Templates