MAV 2008

Print
Shrink Disc MAV 2008 standard series


Features
• external locking device for hollow shaft (hub)-shaft connection
• three-part design
• self-releasing tapers, greased with MoS2 (µ=0.05)
• screws greased with MoS2 (µ=0.10)
• zinc plated outer rings
• O-Ring between outer rings from size d=140 mm and above
• standard series, medium capacity
• SPLIT and HALF HC and HT versions also available (for HALF versions, performances are reduced of 50%)
• tolernces of shaft and hub bore: see table
• tolerance of hub outer diameter: h8
• surface finish of shaft and hub Ra<3.2 µm
• shaft-hub bore contact surface rease-free and dry (µ=0.15)
Manufacturer: MAV
Description

Shrink Disc MAV 2008 standard series

Features

  • external locking device for hollow shaft (hub)-shaft connection
  • three-part design
  • self-releasing tapers, greased with MoS2 (µ=0.05)
  • screws greased with MoS2 (µ=0.10)
  • zinc plated outer rings
  • O-Ring between outer rings from size d=140 mm and above
  • standard series, medium capacity
  • SPLIT and HALF HC and HT versions also available (for HALF versions, performances are reduced of 50%)
  • tolernces of shaft and hub bore: see table
  • tolerance of hub outer diameter: h8
  • surface finish of shaft and hub Ra<3.2 µm
  • shaft-hub bore contact surface grease-free and dry (µ=0.15) 

Composition

  • slotted inner ring
  • front outer ring
  • rear outer ring

set of hexagonal head cap screws, grade 10.9

Reviews

There are yet no reviews for this product.
Downloadhttp://bigtheme.net/joomla Joomla Templates